Installation guide

Printer Configuration Problems
11-12
Verify LAT Group Codes
Verify that the group codes on the service node match that of the access server.
At an OpenVMS host, enter the following commands:
$ RUN SYS$SYSTEM:LATCP
LATCP> SHOW CHARACTERISTICS
Node Name: SATRN LAT Protocol Version: 5.2
Node State: On
Node Ident: A VAX 6250 Cluster Member
Incoming Connections: Enabled Incoming Session Limit: 255
Outgoing Connections: Enabled Outgoing Session Limit: 255
Circuit Timer (msec): 80 Keepalive Timer (sec): 15
Retransmit Limit (msg): 8 Node Limit (nodes): 100
LAT Printing Problems
Multicast Timer (sec): 30 CPU Rating: 100
User Groups: 1, 5
Service Groups: 1, 5
Service Name Status Rating Identification
EARTH Available 114 D A VAX 6250 Cluster Member
GALAXY Available 114 D A VAX 6250 Cluster Member
-----------------------------------------------------------
LAT Control Program, Version 5.4-1
-----------------------------------------------------------
LATCP>
In this case, the service node groups are 1 and 5.