Specifications

SPECTRUM Web Operator
Known Model Browser Anomalies in Web Operator Foundation and Suite 6.5
SPECTRUM Software Release Notice Page 93
7 At the Web Operator client, do one of the following:
• If the port you specified during installation is 80 (the default), point
your Web browser to the following URL:
http://<host IP>/spectrum/
where <host IP> is the IP address of the machine on which you
installed SPECTRUM Web Operator.
• If the port you specified during installation is not 80, point your
Web browser to the following URL:
http://<host IP>:<portnumber>/spectrum/
where <host IP> is the IP address of the machine on which you
installed SPECTRUM Web Operator and <portnumber> is the port
number specified during the installation.
Problem 4: Web Operator is unable to connect to any SpectroSERVER, or
to get a list of servers from the main location server if there is no
SpectroSERVER running on the main location server (or no valid user for
the Web Operator server).
Solution: In the WebApps/SG-Support/CsResource/preferences/
ssroe.prf file, set the landscape handle to the landscape handle where
the home user model is located. This can be done before you click the Next
button on the “Populate Web Operator Users” wizard screen in the install.
If the “Populate Web Operator Users” wizard screen hangs then you can
end the process, set the preferences, and try to obtain users again.
Known Model Browser Anomalies in Web
Operator Foundation and Suite 6.5
Problem 1: If the SpectroSERVER database has been reinitialized and you
have bookmarked Model Browser views you will need to add the
bookmarks again as the bookmark may represent a different model.
Problem 2: If you click the Destroy Pipe button without selecting a