Specifications

SPECTRUM Software Release Notice Page 27
Enterprise Alarm Manager
Alarm Manager and Enterprise Alarm Manager provide the user with a dynamic view
of SpectroSERVER alarms. If your network is modeled using a distributed
SpectroSERVER, you may have several landscape icons in SpectroGRAPH, each
representing its own SpectroSERVER. You can choose to view all or some of these
landscapes in Enterprise Alarm Manager.
Corrected Alarm Manager Anomalies in
SPECTRUM 6.5
1 You are no longer taken back to the main Enterprise Alarm Manager
View (on the Solaris platform) after creating a pingable in a topology
view, after you enter a model name in the Filter area, select the model
name table, and then type in the model name entry.
2 On the Solaris platform, when you create a duplicate model, open the
Alarm Manager from the duplicate model, open the popup view
navigator menu off the alarm model, then select Device -> Chassis,
you no longer receive an error message.
3 When you right click an alarm in the Alarm list while SpectroSERVER
is shutdown, the model submenu and an error message no longer
pops up telling you that SpectroSERVER is down or that
troubleshooter actions will not be available. In addition, the Alarm
Manager no longer freezes on Windows NT.
4 On the Windows platform, when you select Alarm Manager from the
Tools menu while SpectroSERVER is in its startup process and you
click OK from the Select Server dialog, you no longer receive an error
message that contains bogus characters and can now restart Alarm
Manager.
5 If you have modeled a landscape that has been modeled with an
alarm on it, when you right click and choose either Topology,