Specifications

Corrected & Known Anomalies
SPECTRUM Software Release Notice Page 164
SmartSwitch ATM - Zeitnet Switch
Known Anomalies:
Problem 1: In the Device Topology view for the ZX_250 model type, the
Port Load Status field is blank.
Solution: This is a firmware problem.
Problem 2: PVC links, cross connections, paths and channels cannot be
created on a on a Zeitnet device. This happens with the 9A100 or
SmartSwitch 6500 with the Write community name and the trusted NMS
address set correctly.
Solution: This problem will be addressed in a future release.
Problem 3: The Zeitnet System Information view for the SmartSwitch
6500 displays red-boxed fields.
Solution: This is a firmware problem.
Problem 4: For the Zeitnet devices, some interfaces within the Interface
Device and Device Topology views show incorrect IP or MAC addresses.
Solution: This is a firmware problem.
Problem 5: The ZX_250 Switch Application Port view shows the Number
of Ports field as “7”, while the Port table displays eight rows of port data.
Solution: This is a firmware problem.
Problem 6: Modeled 6Exxx cards (with the ZX-250 SW_Link) do not
provide Port Performance view statistics. The “Device not configured” error
Part Number Devices Firmware Release
SM-CSI1085 SmartSwitch 2500 (former ZX-250)
SmartSwitch 6A000 (ATM module)
SmartSwitch 9A100 (ATM module)
SmartSwitch 6500 (ATM backbone)
2.04.09 6.0.3