Specifications

Corrected & Known Anomalies
SPECTRUM Software Release Notice Page 138
ForeRunner Series of ATM Switches
Known Anomalies:
Problem 1: Some fields for ASX and OC3 models are red-boxed in the
Application Port view (accessed from the Application Configuration view’s
Port Table).
Solution: The Management Module functions as designed. This is a
firmware problem.
Problem 2: Areas within the Forerunner’s Performance, Detail, and More
Detail views are red-boxed.
Solution: This is a firmware problem.
Problem 3: If you try to use the Find view to find the Fore_SONET_App by
Model type, the lower portion of the Device view is blank or shows incorrect
information.
Solution: Do not use the Find view for this purpose; use the conventional
methods of accessing the Device view.
Problem 4: Attempts to model a ForeSwitch as a GenSNMPDev show the
model type as a ForeSystems Workstation, eventually changing to a
ForeSys RT router model type. After navigating into the Device Topology or
the Application views, ForeUserApp icons appear within the views.
Solution: This is a firmware problem
Problem 5: A yellow alarm occurs if multiple ForeWorkstations are
modeled in SPECTRUM. The alarms only appear on ForeWorkstation
models using an older (previous) version of the Fore adaptor card.
Part Name Devices Firmware Release
SM-FOR1000 ASX-100, ASX-200, 9A000,
ASX-1000, ASX-4000
5.3.1 6.0.3