Specifications

Corrected & Known Anomalies
SPECTRUM Software Release Notice Page 133
Extreme Devices
Corrected Anomalies:
1 In the DevTop > Interface view, the slot number and port number
information is no longer incorrect.
2 When sending traps to an Extreme device, the Event message for
some traps is no longer incorrect, since it does display the system
description text string.
3 The VLAN ID used by Extreme Summit, BlackDiamond, and Alpine
switches are now consistent with other devices configured in a mult-
vendor 802.1Q VLAN environment and all users of a single VLAN are
listed.
Known Anomalies:
Problem 1: VLAN fault isolation is not supported for Extreme Summit
switches running a version of ExtremeWare that is earlier than 6.0.
Solution: VLAN fault isolation will only work with devices running
ExtremeWare 6.0 or later due to a need to use extremeVlanStackTable,
which is supported in version 6.0 or later. VLAN information is available
via the ExtrVlanApp model in the Application view.
Problem 2: VLAN information may not be accessible from the VLAN List
menu selection in the Device Topology view.
Solution: The VLAN information is available via the ExtrVlanApp model
in the Application view. It is not available from the Device Topology view
Part Number Devices Firmware Release
SM-EXT1000 Extreme Summit
switches and
BlackDiamond
6808 Core Switch
Summit: ExtremeWare 2.1.7,
BlackDiamond: ExtremeWare
3.09b4 and Version 5.0 for policy
management
6.0.3