Specifications

System Requirements
SPECTRUM Software Release Notes Page 33
1 mv DDM to a temporary directory (DDM_TMP)
2 create an empty DDM directory in SS (mkdir DDM)
3 mount the new disk to $SPECROOT/SS/DDM
4 cp DDM_TMP/*DDM (remember to also get .configrc)
W
INDOWS NT (ONLY)
Currently, it is not possible to separate the DDM from the rest of the
SPECTRUM installation on Windows NT. Therefore, the required
configuration is to install SPECTRUM (with DDM) on its own 3-disk stripe
set which is separate from the disk holding the operating system. The
stripe set can be set up using the NT Disk Administrator.
Setting up the above 3-disk stripe set with the use of a raid controller
instead of NT Disk Administrator, provides even better performance.
*D
ISK ON NT
disk1 = OS and SWAP
disk2 & 3 = SPECTRUM/DDM stripe set.
Web Browser Recommendations
On Solaris systems, Aprisma recommends using Netscape 4.7x or later
with the Java 1.3.0_01 run-time environment and plug-in Web Server.
The Apache Web server included on the self-extracting archive is
recommended.
On Windows NT systems, Aprisma recommends Microsoft® Internet
Explorer 5.0 or Netscape 4.7x or later with the Java 1.3.0_01 run-time
environment and plug-in Web Server.