Specifications

System Requirements
SPECTRUM Software Release Notes Page 25
If a 24-bit color card is already installed but your workstation is not in
24-bit color mode, complete the following configuration instructions:
1 Become root
2 Create your own, user-defined config directory by typing at the
command line:
mkdir -p /etc/dt/config
3 Navigate to the new config directory by typing:
cd /etc/dt/config
4 Create a file and name it Xservers by typing:
vi Xservers
5 Enter the following one line string in the new Xservers file:
Local local_uid@console root /usr/openwin/bin/Xsun :0
-nobanner -dev /dev/fb 0 defclass TrueColor defdepth 24
Save and exit the Xservers file.
The above string must be one continuous string on one line. It forces
the windowing manager to take full advantage of a 24-bit color card.
The string contains zeros, NOT uppercase o’s.
6 Reboot or restart the Xserver.
If your workstation still is not in 24-bit color mode after following
installation instructions in the manual that came with the card or after
editing the /etc/dt/config file, contact Sun Microsystems for further
assistance.