Specifications

Corrected & Current Anomalies

SPECTRUM Software Release Notes Page 180

SmartSwitch ATM - Zeitnet Switch (2500, 6500,

6A000, 9A100)

Known Anomalies:

Problem 1: In the Device Topology view for the ZX_250 model type, the

Port Load Status field is blank.

Solution: This is a firmware problem.

Problem 2: PVC links, cross connections, paths and channels cannot be

created on a on a Zeitnet device. This happens with the 9A100 or

SmartSwitch 6500 with the Write community name and the trusted NMS

address set correctly.

Solution: This problem will be addressed in a future release.

Problem 3: The Zeitnet System Information view for the SmartSwitch

6500 displays red-boxed fields.

Solution: This is a firmware problem.

Problem 4: For the Zeitnet devices, some interfaces within the Interface

Device and Device Topology views show incorrect IP or MAC addresses.

Solution: This is a firmware problem.

Problem 5: The ZX_250 Switch Application Port view shows the Number

SPECTRUM

Part Name

Switches

Firmware

Version

SM-CSI1085 SmartSwitch 2500 (standalone

ATM; the former Zeitnet ZX-250)

SmartSwitch 6A000 (ATM module)

SmartSwitch 9A100

(ATM module)

SmartSwitch 6500 (ATM

backbone)

2.04.09 6.0 Rev 0