Specifications

Corrected & Current Anomalies

SPECTRUM Software Release Notes Page 170

SFSmartCell Switch (9A656-04, 9A686-04)

Known Anomalies:

Problem 1: The SFCS device’s Interface Configuration Table view’s

Clocking to Mother Board field is empty, and the same field in the SFCS

Interface Configuration view is red boxed for devices using the 02.02.03

firmware.

Solution: This is a firmware related issue.

Problem 2: AutoDiscovery does not resolve the port connection for the

9A656-04. Although you may see a connection between the switches, you

will need to resolve the port manually.

Solution: To find the port, read the atmInterfaceMyNeighborIpAddress

and atmInterfaceMyNeighborIfName from the ATM MIB. (Not all devices fill

in atmInterfaceMyNeighborIfName with the port number.) The devices

should show atmInterfaceMyNeighborIfName with the port number, and

not the ifDescr value. This attribute is read-write; you can change this

name to another interface name. This way, you can show two ports on one

switch connected to two ports of another switch.

Problem 3: The ANIM Configuration view on a incorrectly identifies a 3-

port 155Mbps SC ANIM as a 2-port 622Mbps SC ANIM.

Solution: This is a firmware related issue.

SPECTRUM

Part Name

Devices

Firmware

Version

SM-CSI1073 SmartSwitch 9A656_04

SmartSwitch 9A686_04

2.04.09 6.0 Rev 0