Specifications

Corrected & Current Anomalies
SPECTRUM Software Release Notes Page 140
Cisco Router
Known Anomalies:
Problem 1: The Cisco 3T MIM is not recognized in hub or MMAC chassis
views.
Solution: This is a Cisco 3T MIM firmware problem.
Problem 2: Modeling a Cisco 4000 with the Rtr_Cisco4000 model type
generates a wrong model type alarm.
Solution: All Cisco routers of firmware version 10 and above should be
modeled with the Rtr_Cisco model type.
Problem 3: The CiscoPingApp currently supports only the IP and DECnet
protocols. The Ping Request Entry Table cannot display multiple protocol
address formats using a single table icon. For that reason, non-IP
protocols may display their respective addresses incorrectly in the table
view but the device receives the address as entered in the “Add Request”
window.
Solution: Additional protocols will be supported in a future release of the
SPECTRUM
Part Name
Device
Firmware
Version
MM
Version
SM-CIS1001 Rtr_Cisco
(Cisco Router 2)
Rtr_CiscoIGS,
CGS, AGS, MGS,
2500, 3000,
4000, 7000
11.1(8)
11.2
6.0 Rev 0
SM-CIS1002 Lightstream
10.10 (ATM
Support)
11.2(5)/
wa3(2b)
6.0 Rev 0