Specifications

Management Module Anomalies
Management Module SRN 6.0 Rev 0 Page 52
Problem 5: The ZX_250 Switch Application Port view shows the Number
of Ports field as “7”, while the Port table displays eight rows of port data.
Solution: This is a firmware problem.
Problem 6: The modeled SS6500 currently does not provide a Chassis
Device view, as the SS6500 does not fully support the Container MIB.
Solution: This is a firmware problem.
Problem 7: Modeled 6Exxx cards (with the ZX-250 SW_Link) do not
provide Port Performance view statistics. The “Device not configured” error
message appears instead, or the Performance view shows red-boxed
attributes.
Solution: This is a firmware problem. Upgrade to the SS6500 with 2.4
firmware, which provides the MIB-II performance parameters. Set Primary
Application to MIB-II; launch the Performance view from the device model.
Problem 8: In the ATM Switch Application Virtual Path Links table view
for the SS2500/ZX_250SwitchApp, the AdminStatus field shows a “0”
value. Double-clicking any table entry displays the ATM Switch
Application VPL table view, showing the AdminStatus field with a “???”
value. In both views, the device should return a “1” value for Up, or “2” for
Down.
Solution: This firmware problem will be addressed in a future release.
Problem 9: The ZX250SwitchApp for the SS6500_CSM is displaying some
red-boxed fields in the Switch Memory/Heap Stats view firmware 2.04(9).
Solution: This firmware problem will be addressed in a future release.
Problem 10: The ZX_250 Switch application’s Configuration view shows
red-boxed fields.
Solution: SPECTRUM is not reading the MIB attribute values for the red-
boxed fields; this will be addressed in a future release.