Specifications
Table Of Contents
- Titlepage
- Notice
- Contents
- Management Module Anomalies
- 3Com FMS/MSH
- 3Com LinkSwitch 1100/3300
- 3Com NetBuilder II
- 3Com PortSwitch Family
- AT & T StarLAN10 SmartHUB
- Bay Centillion 100
- CSX200/400
- Cayman GatorStar Repeater/Router
- Cisco Catalyst
- Cisco Access Server
- Cisco Works Integration
- Cisco Router
- ELS100-24TXG
- EMME/EMM-E6
- ESXMIM (Ethernet Switching Bridge)
- Ethernet Hubs
- FDM
- ForeRunner Series of ATM Switches
- Generic SNMP Devices
- Host HP
- Host Compaq Module
- Host NT Module
- Kentrox DataSMART
- NBR 620, 420, and 220 (Ethernet Bridge Routers)
- RMON Management Module
- RingView for Token Ring
- SEHI Hubs
- SFSmartCell Switch (9A656-04, 9A686-04)
- SmartSwitch 2000 Family
- SmartSwitch 8H02-16
- SmartSwitch 6000 Chassis
- SmartSwitch 6000 Family
- SmartSwitch 9000 Dual Backplane
- SmartSwitch 9000/9500
- Common Anomalies - SmartSwitch 9000/9500
- SmartSwitch ATM - Zeitnet Switch (2500, 6500, 6A000, 9A100)
- SmartSwitch ATM Access Module (9A128-01, 9A426-02)
- SmartSwitch FDDI (9F310-02, 9F426-02, 9F426-03)
- Gigabit Ethernet SmartSwitch SSX (9G5xx-xx)
- SmartSwitch Router (SSR) 250/2000/8000/8600
- SmartSwitch Token Ring MicroLAN Switches (9T122-08, 9T122-24, 9T125-08, 9T125-24)
- SmartSwitch FDDI MicroLAN Switch (9F106-02, 9F116-01, 9F120-08, 9F122-12, 9F125-08, and 9F241-12)
- SmartSwitch STS16 Token Ring
- SynOptics 5000 Hubs
- SynOptics Modules
- TRMM and TRMMIM Token Ring Modules
- TRMM-2 and TRMM-4 Token Ring Modules
- Xylogics Terminal Server II
- Wellfleet Routers
- SPMA (SPECTRUM Portable Management Applications)
- Index
Management Module Anomalies
Management Module SRN 6.0 Rev 0 Page 44
Problem 3: In the Chassis Device view’s Physical Application Display view
for the 6E123-50 and 6H133-37, selecting Port Display Form’s Speed
menu choice then selecting the Repeater Port Display Form’s Speed menu
choice causes a value of INV (Invalid) to appear for ports.
Solution: The Port Display Form speed of 10 mb is correct. The Repeater
Port Form speed menu is incorrect and will be removed in a future release.
Problem 4: When autodiscovering a SS6000 chassis in standalone mode,
with separate IP addresses for all blades, not all backplane connections are
being resolved for the devices. The 6E138-25 and 6E128-26 are being
modeled as a Gen6000 BG, and with firmware versions 4.09.08 or 4.07.28.
Solution: Upgrade the firmware and rerun AutoDiscovery on the range.
This problem will be fixed in a future release.