Specifications

Management Module Anomalies
Management Module SRN 6.0 Rev 0 Page 39
Problem 3: AutoDiscovery does not resolve the port connection for the
9A656-04. Although you may see a connection between the switches, you
will need to resolve the port manually.
Solution: To find the port, read the atmInterfaceMyNeighborIpAddress
and atmInterfaceMyNeighborIfName from the ATM MIB. (Not all devices fill
in atmInterfaceMyNeighborIfName with the port number.) The devices
should show atmInterfaceMyNeighborIfName with the port number, and
not the ifDescr value. This attribute is read-write; you can change this
name to another interface name. This way, you can show two ports on one
switch connected to two ports of another switch.