Specifications

Management Module Anomalies
Management Module SRN 6.0 Rev 0 Page 25
Ethernet Hubs
Known Anomalies:
Problem 1: In the IRBM’s Device Topology view, the Edit menu’s New
Model option does not list LAN802.3 or LAN802.5 models as models that
can be created.
Solution: If you wish to connect these types of LAN models to the IRBM
ports, exit the DevTop view and create the LAN models at the same
topology level as the IRBM, then connect them to the IRBM with pipes. Go
back into the DevTop view and drag the resultant Off-Page Reference icons
down onto the desired ports.
Problem 2: Generating either the “New MIB Environment Temp Normal
Trap” or the “New MIB Environment Voltage Normal Trap” for an IRBM
results in an unknown trap alert message in the Event view instead of trap
notification.
Solution: This problem will be corrected in a future release.
SPECTRUM
Part Name
Device
Firmware
Revision
MM
Version
SM-CSI1000 IRBM, IRM-2,
IRM-3
1.07.02 6.0 Rev 0
SM-CSI1000 IRM-3 BP 2.00.01 6.0 Rev 0
SM-CSI1000 MINI-MMAC 2.03.04 6.0 Rev 0
SM-CSI1000 MRXI 22/24 1.11.09 6.0 Rev 0
SM-CSI1000 MRXI-2E 2.03.02 6.0 Rev 0
SM-CSI1000 MRXI-93
SNMP IRM
2.03.02 6.0 Rev 0