Specifications

Management Module Anomalies
Management Module SRN 6.0 Rev 0 Page 13
CSX200/400
Known Anomalies:
Problem 1: The fr1315App’s Frame Relay Data Link Connection
Management table for the CSX200 and 400 may incorrectly show the State
value as “6.” If you double-click on State, the Data Link Connection
Management table view shows “???” for the State value.
Solution: This is a firmware problem.
Problem 2: After modeling a CSX5500, 7000, or 9w006/7, and navigating
to the WAN Configuration view, Seg Violation messages may appear
(depending upon the platform) and the Configuration view disappears.
Solution: These devices do not support SPMA applications. Do not
attempt to navigate to the views through the Utilities menu > Applications
option.
Problem 3: Changes made to the CtIpOspfApp’s SPMA OSPF Neighbor
table for the CSX200 cannot be saved, and error messages may appear.
Solution: This is a firmware problem; the CSX200 does not support
OSPF.
SPECTRUM
Part Name
Device
Firmware
Version
MM
Version
SM-CSI1077 CSX200/400 1.03.13
2.01.10
6.0 Rev
0
SM-CSI1077 CSX5500,
CSX7000