Specifications

Cisco Router

Anomalies Management Module

46 Software Release Notice 5.0 Rev 1

Cisco Router

Corrected Anomalies:

Known Anomalies:

SPECTRUM

Part Name

Device Firmware

Version

SM-CIS1001 Rtr_Cisco

(Cisco Router 2)

Rtr_CiscoIGS,

CGS, AGS, MGS,

2500, 3000, 4000,

7000

11.1(8)

11.2

5.0 rev1

SM-CIS1002 Lightstream

10.10 (ATM

Support)

11.2(5)/

wa3(2b)

5.0 rev1

1. Alarms for Router_Cisco models now stop ﬂashing when the Acknowledge option is used.

2. The Lost & Found view now shows the Large Device icon.

Problem 1: The cisco 3T MIM is not recognized in hub or MMAC chassis views.

Solution: This is a cisco 3T MIM firmware problem. The management module functions as

designed.

Problem 2: Modeling a Cisco 4000 with the Rtr_Cisco4000 model type generates a wrong model

type alarm.

Solution: All Cisco routers of firmware version 10 and above should be modeled with the

Rtr_Cisco model type. The management module functions as designed.

Problem 3: The CiscoPingApp currently supports only the IP and DECnet protocols. The Ping

Request Entry Table cannot display multiple protocol address formats using a single

table icon. For that reason, non-IP protocols may display their respective addresses

incorrectly in the table view but the device receives the address as entered in the

“Add Request” window.

Solution: Additional protocols will be supported in a future release of the management module.