Specifications

SynOptics 5000 Hubs
Anomalies Management Module
42 Software Release Notice 5.0 Rev 1
Problem 4: Traps are only generated against the IP address of the first Data Collection Engine
(DCE) on an Ethernet or Token Ring Network Management Module (NMM). If
contact is lost with the first DCE, the user will not receive traps.
Solution: This is a firmware problem.
Problem 5: In the Device view, TR DCE icons may disappear and the NMM Module menu
selections will change to a default Module Notes and Module Configuration.
Solution: This is a firmware problem where the TR NMM is rebooting and the TR
NMM entry disappears from the device’s module table.
Problem 6: Information deleted from the Config File Name and/or Image File Name fields in the
DCE Agent Configuration view reappears in the view after the view’s next poll cycle.
Solution: Replace the entries to be deleted with null characters or blank spaces. This is a
firmware problem.
Problem 7: In the Ring In/Ring Out Extension Information view, the Ring In UNA and the Ring
Out UNA may be “0.0.0.0.0.0”, or both values may be the same.
Solution: This is a firmware problem.
Problem 8: Attempts to change all Module Ring attachments and Module Ring Speed for all
attachments in a TR Module Configuration view fail when made at the same time.
Solution: Change the Module Ring Attachments first followed by the Module Ring
Speed, or vice versa. Do not attempt to change both at the same time. This is a
firmware problem.
Problem 9: The SM-SYN1003 management module will not support the 5005 chassis.
Solution: This problem will be fixed in a future release of SPECTRUM.