Specifications

SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series
99 of 145
SFCS System Configuration View
This view contains information used to set up and configure each Virtual Switch. It contains the following
information:
Admin Status
Sets the administrative state of the Secure Fast
Cell Switching (SFCS) services for this virtual
switch. This controls the SFCS state at a chassis
level. Regardless of the per-interface state of each
SFCS switching element and the state of active
connections, writing the value disabled causes
the entire switch to immediately shutdown.
Oper Status
Indicates the current operating condition of this
switch. Possible values are described in Table 27.
Oper Time
Indicates the amount of time that this switch
system has been in its current operational state.
Last Change
Indicates the last time a change was made to the
configuration entry for this switch.
Switch Capacity
Indicates the maximum capacity of the switch in
megabytes.
Max Cnx Entries
Indicates the maximum number of connections
which can be established on this switch.
Continued...
Table 27: Operating Status Values
Value Description
enabled running
disabled not running
pending-disable shut-down in progress
pending-enable start-up in progress
invalid-config not running, invalid configuration
other none of the above
Table 27: Operating Status Values
Value Description