Specifications

SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series
92 of 145
Station Alarms Dialog Box
The Station Alarms dialog box allows you to read, display, and modify the alarm settings for a single station or
list of stations. The list displays the stations that were on the ring at the time the dialog box was opened. You can
read and modify the settings to a valid station that does not appear in the list and was added after opening the
view by entering its address in the Station field. To access this dialog box click the:
• Station Alarms (page 81) button in the Token
Ring Station Table View (page 80)
• Station Alarms (page 84) button in the Token
Ring Station Isolating Errors View (page 82)
Station
Displays the address of the current station. You
can enter the address of a valid station in this
field to make it the current station.
Alarm
Lists the threshold alarms that can be
manipulated. The alarms in this column include
Line, Internal, Burst, A/C, and Congestion.
Threshold
Displays the current setting for each
corresponding alarm threshold. You can change
the values by selecting the field and editing the
number.
• Station Alarms (page 89) button in the Token
Ring Station Alarm Thresholds View (page 87)
State
Indicates the state of each corresponding alarm
threshold (Enable or Disable).
Stations
Displays the MAC addresses of all stations in the
ring at the time the dialog box was opened except
the current station, which is displayed in the
Apply Settings to list. Double-clicking on an
address in this list moves it to the Apply Settings
to list.
Apply Settings to
Displays the MAC addresses of all stations to
which the threshold settings may be applied. This
list always contains the current station’s MAC
address upon opening the dialog box. Double-
clicking on an address in this list moves it to the
Stations list.
Continued...