Specifications

SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series
76 of 145
TR Ring Configuration View
This view provides configuration information on the ring the ports are attached to. To access this view, click the
Ring Configuration (page 73) button in the Token Ring Configuration View (page 73).
Ring Configuration
This section of the TR Ring Configuration view displays the following information:
Ring Name
Displays the ASCII name assigned to this ring.
This name defaults to Network n, where n is a
unique integer value.
Ring Number
Displays the number of the attached ring. If
SPECTRUM cannot determine the number of the
ring, a zero is returned.
Ring Speed
Displays the speed of the ring, which can have a
value of 4 or 16 megabits.
Ring Status
Displays the operational state of the ring.
Active Monitor
Displays the MAC address of the active monitor
for the ring. This address will appear in any tables
with an asterisk (*) to identify it.
Active Stations
Displays the number of active stations currently
inserted on the ring.
Beacon Recovery
Provides a button, allowing you to Enable or
Disable automatic beacon recovery for the TR
MicroLAN Switch Module. When Disabled, the TR
MicroLAN Switch Module will not attempt to
reinsert itself into the ring after entering a
beaconing state. If the device does not support
automatic beacon recovery, SPECTRUM will
display a status of Invalid.