Specifications

SPECTRUM Enterprise Manager SmartSwitch 9000/9500 Series
71 of 145
ILMI VCI
Indicates the VCI value of the VCC supporting the
ILMI at this ATM interface. If the values of both
ILMI VPI and ILMI VCI equal 0, then the ILMI is
no supported for this ATM interface.
Address Type
Indicates the type of primary ATM address
configured for use at this ATM interface.
Admin Address
Indicates the address assigned for administrative
purposes.
Neighbor Address
Indicates the IP address of the neighbor system at
the far end of this interface to which a Network
Management Station can access network
management information.
Neighbor If Name
Indicates the name of the interface on the
neighbor system at the far end of this interface, to
which this interface connects. If the neighbor
system is manageable through SNMP and
supports the object ifName, the value of this
object must be identical to that of the ifName for
the ifEntry of the lowest level physical interface
for this port. If this interface does not have a
name, the value of this object is a zero length
string.
The Configuration table can be sorted, searched, and updated using the following buttons within the view:
Allows you to sort the table based on the column
heading you select. Just select a column heading
and click the Sort button. The table is rearranged
according to the chosen column.
Allows you to search the table for a specific entry.
Just select a column heading, click the Find
button, and enter a search string in the dialog
box.
Allows you to update information in the table.
Sort
Find
Update