Specifications

9031280 E4 Configuring RMON Alarms and Events

6-15

Traps

RMON Agent

Accessing the Trap Table Screen

To access the Trap Table Screen from the Features Selection Screen, use the

arrow keys to highlight the Component Trap Table option and press the

Return key (or F8). The Trap Table Screen, shown in Figure 6-6, appears.

Figure 6-6. Trap Table Screen

The Trap Table Screen contains the following fields:

• SNMP Community Name—The community name serves two purposes.

First, it is a Trap IP Address identifier, which uniquely identifies the

particular Trap IP Address it is associated with in the table, or a number

of Trap IP Addresses if the same identifier is applied to more than one

address. Its purpose is to define subsets of addresses in the table to send

traps to, depending on the event community name in the trap request

coming from the function on the device. A trap is sent only to those Trap

IP Addresses (management stations) whose community name in the Trap

Table matches the community name in the request. This allows you to

send a trap only to those management stations which would be interested

in that information. In this case, the trap request is coming from the

RMON agent.

EMME LOCAL MANAGEMENT

Cabletron EMME Revision 0.00.00

TRAP TABLE

SNMP Community Name

Traps Trap IP Address

ctron

public

<CR>

134.141.9.6

134.141.6.1

0.0.0.0

SAVE-------------COMMUNITY NAMES------------IP TABLE----------------------SNMP TOOLS-------------------CLIpppppp------RETURN

--F6-----------------------------F7------------------ppppp--F8-------------------------------------F9----------------------------F10