Specifications

9031280 E4 Configuring RMON Alarms and Events
6-11
RMON Events
Modifying a Valid Event
Modifying a Valid Event
To modify an event which is in the valid state, you must first return the event
to the underCreation state. After making your changes, return the Event to
the valid state.
To modify an existing event definition in the Event Table, follow these steps:
1. Double click on the event entry you want to change. The Event Setup View
appears.
2. Click on the Status button and select underCreation.
3. Click the right mouse button, or select Save All Changes from the File
menu, and click OK in the dialog box that appears. The event will now be
placed in the underCreation state. To verify this, select Update in the
Event View and observe the state change in the Event Table.
4. Follow the steps outlined in the previous section, Modifying and Enabling
an Event Under Creation.
Removing an Event
To remove an event from the table, follow these steps:
1. Double click on the event in the Event Table to access the Event Set Up
View.
2. Click on the Status button and select invalid from the Status menu.
3. Click the right mouse button, or select Save All Changes from the File
menu, and click OK in the dialog box that appears. The event will now be
removed from the Event Table. Dismiss the Event Set Up View window.
4. Click on Update in the Event Table to verify the event was removed.
5. A dialog box informs you that the event no longer exists. Click on OK.