Specifications

RMON Events
Modifying and Enabling an Event Under Creation
Configuring RMON Alarms and Events
6-10
Standard RMON
Management Module Guide
Now that you have created the event, you must change the status to valid.
Note that Cabletron RMON agents on the device will delete an event whose
status remains underCreation for an extended period of time. (RMON agents
produced by other companies might not delete events that are under creation.)
To change the status of the new event to valid, follow the steps outlined in
Modifying and Enabling an Event underCreation.
Modifying and Enabling an Event Under Creation
1. In the Event Table, double click on the event’s entry. The Event Set Up
View appears.
2. You can modify the following fields. For a description of these fields, see
the previous section, Creating an Event.
• Owner
• Community Name
• Action
• Description
3. To enable the event, click on the Status button (located above the
Description Information box) and select valid. Remember that
Cabletron’s RMON agent will delete the event if you neglect to change the
status to valid.
4. To complete the process, click the right mouse button, or select Save All
Changes from the File menu, and click OK in the Save Changes dialog box
that appears. Close the window and return to the Event Table View.
5. To see the new configuration, the Event Table View must be updated to
reflect the new configuration. Click Update in the Event Table. The Status
field now reads valid and the event’s values are shown.