Specifications

9031280 E4 Configuring RMON Alarms and Events
6-5
RMON Alarms
Modifying and Enabling an Alarm Under Creation
15. To see the alarm instance you created, click Update in the Alarm Table.
The new alarm definition appears in the table, the Status field reads
underCreation, and the alarm’s values appear.
Now that you have created the alarm, you must change the alarm’s status to
Valid. Note that Cabletron RMON agents on the device will delete an alarm
whose status remains underCreation for an extended period of time. (RMON
agents produced by other companies might not delete alarms that are under
creation.)
To change the alarm’s status, follow the steps outlined in the following section,
Modifying and Enabling an Alarm Under Creation.
Modifying and Enabling an Alarm Under Creation
Follow these steps to modify and enable an alarm:
1. In the Alarm Table, double click on the alarm’s entry. The Alarm Set Up
View appears.
Figure 6-2. Alarm Set Up View
NOTE
Do not modify the Index field in an attempt to modify another alarm. To
configure a different alarm, close the window and select the other alarm.
132.177.00.00