Specifications

Accessing Ethernet Views
Matrix Control
Using RMON Views Standard RMON
5-12 Management Module Guide
oldest entry is deleted and replaced by the newest entry; the time this occurs
is indicated by the column Last Deleted.
Viewing the Matrix Table
Double click on any instance in the Matrix Control Table to open the Matrix
Table View. The Matrix Table View, shown in Figure 5-6, displays traffic
statistics for each host pair, measured at the monitored network interface.
Figure 5-6. Matrix Table View
The following fields appear in the Matrix Table:
• Source—The source MAC address of communications for this pair.
• Destination—The destination MAC address of communications for this
pair.
• Packets—The packets transmitted between the communicating hosts.
• Octets—The octets transmitted between the communicating hosts.
• Errors—The errors detected during communications between the hosts.
The source-destination table provides a complete cross-reference of source
(transmitting) and destination (receiving) devices over the network segment.
Note that addresses are translated to reveal the device’s manufacturer.
132.177.00.00