Specifications

Checking Your Agent Configuration
Loading and Unloading Profiles Standard RMON
3-2 Management Module Guide
To access the Profile Load/Unload View, select Profile Load/Unload from the
RMONApp model’s Icon Subviews menu. The Profile Load/Unload View
shown in Figure 3-1 appears.
Figure 3-1. RMON Profile Load/Unload View
Checking Your Agent Configuration
The Profile Load/Unload View allows you to check which RMON groups are
supported and enabled on the agent. You cannot, however, use this view to
enable and disable the RMON groups themselves.
When you click on the Check Configuration button in the Profile Load/Unload
View, the agent is queried for the RMON groups that are supported. Darkened
buttons in the lower portion of the Profile Load/Unload View indicate those
RMON groups that are supported and enabled. This action also updates the
Icon Subviews menu of the RMON Application models for that agent,
ensuring that the available menu selections match what is supported by the
agent.
Note that the Reset View button only initializes the view; it has no effect on
the agent at all.
Supported and enabled groups
Check Configuration
Reset View button