Specifications

Configuring RMON as a Network Monitor Point
Copying RMON Probes into Network Models
Modeling RMON in SPECTRUM Standard RMON
2-8 Management Module Guide
Copying RMON Probes into Network Models
To designate an RMON probe model as a monitor point, copy the RMON probe
model from the device’s Application View and paste it into the corresponding
802.3 or 802.5 network model. The RMON Probe becomes a monitor point
device within that segment.
Follow these steps:
1. Open the Application View for the device you modeled.
2. Select Edit from the File Menu.
3. Highlight the probe that you want to copy.
4. Select Copy from the Edit Menu.
5. Open the Topology View for the discrete LAN.
6. Select Edit from the File Menu.
7. Select Paste from the Edit menu.
Figure 2-3. RMON Modeling Process
Model for device
supporting RMON
User copies the RMONEth or
RMONTR Probe model from
the Application View and
pastes it into the respective
LAN_802_3 or LAN_802_5
subnet model
LAN_802_3
LAN_802_5