Specifications

Creating a Device Model That Supports RMON
Modeling RMON in SPECTRUM Standard RMON
2-2 Management Module Guide
4. Select a model type that supports RMON from the Select Model Type
dialog box.
The following table lists RMON devices and their model type designations
in SPECTRUM. If your device supports RMON but does not have a model
type designation in SPECTRUM, use the GnSNMPDev model type.
To support RMON, devices must be configured with certain firmware
versions and memory resources. For more information about RMON
requirements, contact Cabletron Systems Technical Support.
5. Click on OK. The Creation View dialog box for that device type appears.
6. In the model’s Creation View dialog box, supply the following information:
• Model Name—A unique name that identifies this device.
• Network Address—The device’s Internet Protocol (IP) address.
Table 2-1. SPECTRUM Model Type Designations
RMON Device Model Type
9E132-15 9E132-15
9E133-36 9E133-36
9E138-12 9E138-12
9E138-36 9E138-36
9E139-12 9E139-12
9E139-36 9E139-36
EMME HubCSIEMME
EMM-E6 BRtrCSIEMM_E6
ESX1320 BRtrCSIESXW
ESXMIM BRtrCSIESXM
NBR620 BRtrCSINBR620
MRXI 22/24 HubCSIMRXi
MicroMMAC-E BRtrCSIuMMAC
MicroMMAC-T BRtrCSIuMMACT
TRMM HubCSITRMM
TRMM-2 HubCSITRMM2
TRMMIM HubCSITRMMIM
TRXI HubCSITRXi
Others GnSNMPDev