Specifications

9031280 E4 Reports
F-3
SetUp
Statistical Reports
Standard Reports
Two report generation (rib) files are provided with the RMON management
module, one for Ethernet and one for Token Ring. These report the segment
performance data seen in the Spectrum Performance View of a Network model
when the Probe model is the Monitor Point.
.../CsRib/RMONEthProbe/EProbePerf.rib
Performance View LabelAttributeAttributeID
LoadMonUtilization0x10207
Frame RateMonPacketRate0x10093
% ErrorsMonErrorRate0x10094
% CollisionsMonCollisionRate0x1024c
.../CsRib/RMONTRProbe/TProbePerf.rib
PerformanceView Label Attribute AttributeID
LoadTR_Mon_Util0x115ba
Frame RateTR_Mon_Frame_Rate0x115a7
Error RateTR_Mon_Errs_Per_MFrame0x115a8
StationsTR_Mon_Active_Stations0x118e2
Custom Reports
Additional RMON data is available for reporting. This data, detailed in
Appendix C, SpectroWATCH, has been provided for each individual parameter
of the RMON Statistics Groups. This enables the user to report on each
statistic apart from an aggregate, and to provide a basis for custom
performance calculations and reports.
These watches are identified by the name prefix ‘mp_Mon’.
To utilize these watches, it is necessary to create custom rib files for this data.
For information on creating rib files, refer to the SPECTRUM Report
Generator User’s Guide.
Running Reports
To generate a statistical report for a model, do the following;
1. Single click the probe model’s icon to highlight it.
2. Select Reports from the file menu
3. Select Generate from the Reports menu.