Specifications

Modifying or Creating Watches
SpectroWATCH
C-2
Standard RMON
Management Module Guide
For information on how to make a Probe model a Monitor Point, and thus
enable its RMON Watches, see section 2.4, Configuring RMON as a Network
Monitor Point.
Modifying or Creating Watches
A user may modify any of the supplied watches or create new ones. It is
recommended that no changes be made to the following Watches, as these are
used by Spectrum’s Monitor Point Performance Views and changes will result
in inconsistencies between these Views and the RMON Segment Performance
Views of the Probes.
RMONEProbe
MonUtilization
MonBitsUsedPerSec
MonErrorRate
MonPacketRate
MonCollisionRate
RMONTProbe
TR_Mon_Util
TR_Mon_Frame_Rate
TR_Mon_Errs_Per_MFrame
TR_Mon_Active_Staions
Using Rmon Watches
A complete set of Watches for the RMON Statistics Groups has been provided
for general purpose use and may be modified by the user without affecting
other Spectrum functions.
These Watches are identified by names beginning with mp_Mon. For example,
RMONEthProbe
mp_MonPackets
mp_MonOctets
RMONTRProbe
mp_MonMLPackets
mp_MonMLOctets
NOTE
In the following sections, for information on how to Create, Modify or Log a
Watch, please refer to the SpectroWATCH Users Guide.