User`s guide

EPIM Specifications
A-4
EPIM-F3
The EPIM-F3 supports Single Mode Fiber Optic cabling. It has an internal
Cabletron Systems FOT-F Fiber Optic Transceiver and is equipped with ST
Connectors. Figure A-3 shows the EPIM-F3. SpeciÞcations for the EPIM-F3 are
listed in Figure A-4 and Table A-3.
Figure A-3. EPIM-F3
Figure A-4. EPIM-F3 Power and Sensitivity Specifications
LNK
EPIM-F3
RX
TX
Receive
Sensitivity
dBm
Less Power
More Power
-40 -35 -30 -25 -20 -15 -10 -5 0
Maximum
Receive
Input Power
Transmitter Power*
(At 25°C into
8.3/125µm fiber)
Minimum Sensitivity (-30.0)
Typical Sensitivity (-31.0)
Maximum Sensitivity (-36.0)
Maximum Receive Input (-6.99)
Typical Receive Input (-7.5)
Minimum Receive Input (-9.72)
Maximum Transmit Power (-12.0)
Typical Transmit Power (-15.5)
Minimum Transmit Power (-21.0)
* Transmit Power Typical Power Minimum Power Maximum Power
Coefficient
(See Note Below) -0.15dBm/°C -0.12 dBm/°C -0.18 dBm/°C