User`s guide

Scheduling an Export
Working with the Scheduler
Exporting Data Data Export User’s Guide
4-6 Version 5.0rev1
Describing Scheduled Export Command Entries
A scheduled export command entry in the Scheduled Entries list consists of
two parts: the scheduling information, which indicates when the command
will be executed, followed by the command, which is enclosed in quotation
marks.
Example command entries with available frequency options are listed as
follows:
Once frequency option entry
Tue Jul 28 1998 at 08:52 Ó/gretel/Spectrum/5.0/SG-Tools/dtxscript
/gretel/Spectrum/5.0/export.output/example_definitionfile.sdeÒ
Daily frequency option entry
Daily at 23:00 Ó/gretel/Spectrum/5.0/SG-Tools/dtxscript
/gretel/Spectrum/5.0/export.output/example_definitionfile.sdeÒ
Weekly frequency option entry
Weekly on Monday at 06:00 Ó/gretel/Spectrum/5.0/SG-Tools/dtxscript
/gretel/Spectrum/5.0/export.output/example_definitionfile.sdeÒ
Monthly frequency option entry
Monthly on the 1st at 01:00 Ó/gretel/Spectrum/5.0/SG-Tools/dtxscript
/gretel/Spectrum/5.0/export.output/example_definitionfile.sdeÒ
Modifying Scheduled Export Commands
The Scheduler enables you to change the definition file or frequency option or
both for a scheduled export command entry in the Scheduled Entries list
before or after you have saved it to the scheduled queue.
To modify an entry:
1. Highlight the entry you want to change in the Scheduled Entries list.
2. Change the entry by selecting another frequency option or definition file
or both (as described in Creating Scheduled Export Commands on
Page 4-4).
3. Click the Modify button.
The modified entry replaces the former entry in the Scheduled Entries
list.
4. Click the Save button.
You will lose your changes if you exit the Scheduler without saving.