User`s guide

9030971 E17 Creating Definition Files
3-17
Setting Historical Data Parameters
Specifying Statistics Data
When you choose a list attribute, the output format of the expected data
will be in a format compatible with attributes of this type. See
Appendix A, Appendix B, and Appendix C for information on how
standard statistics output and list attribute statistics output differ. You
can specify that all statistics output be formatted in the list attribute
format by changing the value of the ListAttrFormat parameter in the
SDE resource file. See Appendix D for information on the SDE resource file.
If you have not specified list attribute format in the SDE resource file, a
dialog box warning you of output file format change will appear under the
following circumstances:
• If you selected a list attribute when none had been selected before. In
this case, the resulting output file will be in list attribute format.
• If you deselected all list attributes that had previously been chosen in
the definition file. In this case, the resulting output file will be in
standard format.
2. Click OK to close the dialog box, or click Cancel to dismiss the operation.
Figure 3-12. Model Types/Models and Common Attribute Lists from the Statistics
Filter Dialog Box
Model Types/Models
HubCSIEMME
sunbird2
frog4
**HubCSISEHI
** sunbird2
HubCSITR
HubCSITRMM4
Hub_CSI_MRXi
Case Sensitive
Search
Contact_Status
Dev_Contact_Status
HardErrorCount
Load
PacketRate
SoftErrorRate
frog9
jscammon5
Common Attributes