Specifications

Configuring the Wireless Network 5-19

Showing Current Access Point Settings

Before modifying parameters on the RoamAbout Access Point, view the current settings.

Using the AP Manager, select the Access Point from the Managed List field and click the

various buttons, such as Wireless Parameters, Operating Modes, IP Network

Parameters, and Hardware. In the Wireless Parameters dialog box, click the Advanced

button to view all the wireless parameters. If you have changed any wireless parameters and

have not yet reset the Access Point, both the operating (current) settings and the settings

that take affect after the next reset are displayed.

Using the console port RoamAbout Access Point Installation Menu, choose Show Current

Settings to display the current Access Point settings as shown below.

=================================================================

RoamAbout Access Point CSIWS, Wireless Bridge: HW=V2.2,RO=V1.7,SW=V6.

SysUpTime : 00:26:37 98 resets

SNMP Read/Write Community : public

Console Password : Disabled

SNMP Trap Addresses : Not Configured

Wired MAC Address : 08-00-2B-A3-89-61

IP Address : 16.20.40.156

Subnet Mask : 255.0.0.0

Default Gateway : Not Configured

Wireless MAC Address : 00-60-6D-92-00-FB

Wireless Network Adapter : RoamAbout IEEE 2.4 GHz DS 11 Mbit

Adapter Revisions : Hardware 4.000 Firmware 4.00

Encryption Capabilities : 128 bit

Bridge Mode : Workgroup

Upline Dump : DISABLED

Memory : 16777216 bytes

===================================================================

Press Return for Main Menu ...