Specifications

Installing the Wireless Network Tools 4-3
RoamAbout Access Point Manager
Installing the AP Manager
The AP Manager supports the Windows 95, Windows 98, and Windows NT (V4.0 or later).
The AP Manager can manage Access Points from a wireless computer. However, the AP
Manager needs to be on a computer connected to the same wired LAN as the Access Point
to assign an IP address or upgrade the Access Point firmware.
The AP Manager is included on diskettes in the RoamAbout Access Point kit. To install the
AP Manager, insert the diskette into the diskette drive and start the setup program (typically
located at a:\setup). Follow the on-line instructions.
After the installation, you can open the AP Manager main window (Figure 4-1) by clicking
the Start button on the Windows desktop and selecting
Programs
→RoamAbout→RoamAbout Access Point Manager.
Figure 4-1:
RoamAbout Access Point Manager Main Window