Specifications

SPECTRUM Enterprise Manager 7 SmartSwitch6000
Supported Devices
The SPECTRUM management modules SM-
CSI1076, SM-CSI1082, SM-CSI1088, SM-
ENT1000 and SM-ENT1001 currently allow you
to model the following Chassis and SmartSwitch
6000 devices:
The 6C105 and 6C107 Chassis on Page 8, are
modular chassis that can incorporate two
load sharing power supplies and from five to
seven SmartSwitch 6000 modules.
The SmartSwitch 6000 Modules on Page 10,
which includes Ethernet, Fast Ethernet,
Gigabit Ethernet, and Carrier modules.
Optional High Speed Interface Modules
(HSIM), Very High Speed Interface Modules
(VHSIM), and Fast Ethernet Port Interface
Modules (FEPIM) that plug into the
SmartSwitch 6000 modules and provide high
speed backbone interfaces to Fast Ethernet,
FDDI, ATM, WAN, and Gigabit Ethernet.
HSIMs do have a different device icon
appearance. This icon is shown next to the
standard icon for the Smartswithch 6000,
Figure 2.
6-SSRM-02 A new module for the
SmartSwitch 6000 chassis. The 6-SSRM-02
views are detailed in the Smart Switch
Router document.Networking Characteristics
Each SmartSwitch 6000 module is designed with
a fully distributed switching architecture, which
allows the modules to be managed as single
entities, with a single module acting as a proxy
agent for the chassis. See Management Modes on
Page 8.
The SmartSwitch 6000 provides port mirroring,
port trunking, broadcast control, Quality of
Service (QoS), VLAN, and topology protocol, all in
either traditional 802.1d mode or Cabletron’s
SecureFast mode. Optional RMON support is also
available.
The SmartSwitch 6000 can provide the following
port connectivities:
Switched Ethernet
Switched Fast Ethernet
MicroLAN Ethernet or Fast Ethernet
Gigabit Ethernet uplinks
OC-3, DS-3/E-3, and OC-12 switched ATM