Specifications

SPECTRUM Enterprise Manager 30 SmartSwitch6000
Interface Icon
This icon is a logical representation of a network
interface or port, see Interface Device View on
Page 29. Figure 8 shows a sample Interface icon,
its labels and double-click zones.
Figure 8: Network Interface Module Icon
Interface Number Label
This label identifies this interface (”e” indicates an
Ethernet interface, “b” indicates a backplane
interface, and the numeral represents the
interface number on this module).
Interface Type Label
This label displays the type of network interface
module (e.g., Ethernet, FDDI, etc.).
Interface Icon Subviews
Table 11 describes each of the Icon Subviews
menu selections available for the Interface icon.
Administrative Status Label
This label displays the state of this port (On, Off,
Testing). Table 12 and Table 13 list the possible
states relative to the application selected. The
(c)
(
d)
(
e)
(
f)
(
a)(b)
e1
Ethernet
0:0:1D:17:2F:3C
0
Interface Icon Subviews Menu
(a) Interface Number Label
(b) Status Label/Port Configuration
(c) Interface Type Label
(d) MAC Address Label/Model Information
(e) Network Information Label/Secondary Address Panel
(f) Gauge Label/Port Performance
ON
Table 11: Interface Icon Subviews
Menu Selection Opens the...
Configuration Port Configuration - CSIIfPort View
on Page 49.
Secondary
Address Panel
Panel that provides the secondary
address and mask for the interface.
Protocols
(with HSIM only)
ATM Client Application on Page 41.
Model
Information
Model Information view described in
SPECTRUM Views.