Specifications

Chapter 1: Changes to Local Management Screens
1-20 Local Management Supplement
FLASH DOWNLOAD CONFIGURATION
Used to force the SmartSwitch to download a new image file from a TFTP
server to its FLASH memory. For details, refer to Section 1.9.
PORT CONFIGURATION MENU
Used to select the screens for configuring the SmartSwitch ports. For
details, refer to Section 1.10.
802.1 CONFIGURATION MENU
Displays only if the SmartSwitch has been configured to operate as an
IEEE 802.1Q switch. When selected, the 802.1 Configuration Menu
screen provides access to the Switch Configuration, 802.1Q VLAN
Configuration Menu, GARP Operating Status, GARP Group Registration,
and 802.1p Priority Configuration Menu screens. For details, refer to
Section 1.19.
1.8 SYSTEM RESOURCES INFORMATION SCREEN
The System Resources Information screen, Figure 1-9, provides
information concerning the processor used in the SmartSwitch and the
amount of FLASH memory, DRAM, and NVRAM that is installed and
how much of that memory is available. This screen is also used to monitor
the current switch utilization and the peak switch utilization.
To access the System Resources Information screen from the Module
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES INFORMATION menu item and press ENTER. The
System Resources Information screen displays.