Specifications

Chapter 1: Changes to Local Management Screens

1-18 Local Management Supplement

12. Use the SPACE bar to select either the ADD or DEL option. Press

ENTER. This adds or deletes the selections for the Source VLAN,

Destination Port, and Frame Format made in steps 1 through 10 and

also updates the screen.

13. Use the arrow keys to highlight SAVE at the bottom of the screen.

Press ENTER. The message “SAVED OK” displays. This saves the

new settings and updates the Source VLAN and Destination Port

read-only fields.

1.7 MODULE CONFIGURATION MENU SCREEN

The Module Conﬁguration Menu screen, Figure 1-8, provides access to

Local Management screens that allow you to conﬁgure and monitor

operating parameters, modify SNMP community names, set SNMP traps,

conﬁgure switch parameters and conﬁgure ports.

The path to the Module Conﬁguration screen is

MAIN MENU/MODULES/SELECT SLOT #/MODULE MENU.

To access the Module Conﬁguration Menu screen from the Module Menu

screen, use the arrow keys to highlight the MODULE

CONFIGURATION menu item and press ENTER. The Module

Conﬁguration Menu screen displays.

TIP

If more than 1 port is being redirected, repeat steps 1

through 12 for each additional setting. Then go to step 13 to

save all the new settings at once.

If an entry is to be changed, delete the entry, save the screen,

then recreate the entry with its new settings.

Any combination, up to 128, of port redirect instances

(conﬁgured on the Port Redirect Conﬁguration screen) and/or

VLAN redirect instances (conﬁgured on the VLAN Redirect

Conﬁguration screen) can be conﬁgured.