User`s guide

Chapter 5: Local Management
5-22 6E123-50 and 6E133-49 User’s Guide
Figure 5-10 Operational Mode Warning Screen
4. Use the arrow keys to highlight the YES command and press ENTER.
The changes are saved, and all the modules installed in the chassis
reboot.
NOTE
If the 6E123-50 and 6E133-49 have been set to 802.1Q
SWITCHING, refer to your Port Based VLAN User’s Guide to
configure the devices for this type of operation.
The Operational Mode field in the Chassis Configuration
screen does not support the SECURE FAST VLAN operational
mode. For the modules to function as SecureFast switches,
they must have a unique IP addresses, and be configured to
act as Standalone devices in terms of Local Management via
the 6C105 chassis. Section 5.15.9 provides additional
instructions and rules that must be met before configuring the
modules as SecureFast switches.
WARNING!
1666
YOU HAVE ELECTED TO SAVE THE OPERATIONAL MODE FOR
THE WHOLE CHASSIS. THIS WILL CAUSE ALL OF THE
BOARDS IN THE CHASSIS TO REBOOT.
ARE YOU SURE YOU WANT TO SAVE THE NEW OPERATIONAL MODE
NOYES