User`s guide

Management Terminal Setup
6E123-50 and 6E133-49 User’s Guide 5-3
5.3 MANAGEMENT TERMINAL SETUP
Use one of the following systems to access Local Management:
An IBM or compatible PC running a VT series emulation software
package
A Digital Equipment Corporation VT100 type terminal
A VT type terminal running emulation programs for the Digital
Equipment Corporation VT100 series
A remote VT100 type terminal via a modem connection
In-band via a Telnet connection
5.3.1 Console Cable Connection
Use the Console Cable Kit provided with the 6C105 chassis to attach the
management terminal to the COM port as shown in Figure 5-1.
Connect an IBM PC or compatible device, running the VT terminal
emulation, to the 6E123-50 and 6E133-49 as follows:
1. Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the 6E123-50 and 6E133-49.
2. Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
3. Connect the RJ45-to-DB9 adapter to the PC communications port.
Figure 5-1 Management Terminal Connection
COM
CPU
6E133-49
Ethernet
Link
1
12
Link
1
12
E
E
N
N
E
E
T
T
1
1
E
E
N
N
E
E
T
T
2
2
E1 E3
E2 E4
1
2345
PS1
PS2
COM
CPU
6E133-49
Ethernet
Link
1
12
Link
1
12
Link
1
12
Link
1
12
E
E
N
N
E
E
T
T
1
1
E
E
N
N
E
E
T
T
2
2
E
E
N
N
E
E
T
T
3
3
E
E
N
N
E
E
T
T
4
4
E1 E3
E2 E4
226950
RJ45 COM Port
RJ45-to-DB9
PC Adapter
UTP Cable
With RJ45 Connectors
PC