User`s guide

Using the RESET Button
6E123-50 and 6E133-49 User’s Guide 4-7
4.4 USING THE RESET BUTTON
The RESET button, located near the upper plastic locking tab of the
module, (refer to Figure 4-3) resets the 6E123-50 and 6E133-49
processor without affecting the NVRAM.
Figure 4-3 RESET Button
To reset the 6E123-50 and 6E133-49 processor, press and release the
RESET button. The module processor goes through a reset process of
approximately 20 seconds. Additional downtime may be added as the
module reenters the network.
!
CAUTION
Pressing the RESET button resets the device, and all current
switching being performed by the module is halted. A module
downtime of up to two minutes will result from this action.
6E133-49
Ethernet
Reset Button