User`s guide

Using LANVIEW
6E123-50 and 6E133-49 User’s Guide 4-3
Table 4-1 LANVIEW LEDs
LED Color State Recommended Action
CPU
Off Power off. Power up chassis.
Red
Blinking. Hardware
failure has occurred.
Contact the Cabletron
Systems Global Call Center.
Solid. Resetting,
normal power up reset.
No action.
Amber
Blinking. Crippled.
Contact the Cabletron
Systems Global Call Center.
Solid. Testing. No action.
Green Solid. Functional. No action.
Amber
and
Green
Booting. Blinks amber
and green while
booting.
No action.
Ethernet
Status
(RX) of
ENET1–4
and ports
5 and 6 of
the
6E123-50
Off
No link. No activity.
Port enabled or
disabled.
No error.
Green
Blinking. Port
disabled, link.
No error.
Amber
Flashing. Port
enabled, link, activity.
No error.
Red Diagnostic failure.
Contact the Cabletron
Systems Global Call Center
for assistance.
Ethernet
Status
(TX) of
ENET1–4
and ports
5 and 6 of
the
6E123-50
Off
Port enabled, and no
activity.
Should flash green every 2
seconds indicating BPDUs
being sent if STA is enabled
and there is a valid link.
Green
Flashing. Indicates
activity. Rate indicates
data rate.
No action.
Amber
Blinking. Port in
standby, link.
Port may be disabled due to
Spanning Tree.
Red
Flashing. Indicates
collision rate.
No action.
Solid. Diagnostic
Failure.
Contact the Cabletron
Systems Global Call Center
for assistance.
Port Link
Status
Green Solid. Valid link. No action
Off No link Refer to Section 4.3.