User`s guide

6E123-50 and 6E133-49 User’s Guide 3-1
CHAPTER 3
INSTALLATION
This chapter covers the following items:
• Required tools (Section 3.1)
• Unpacking the 6E123-50 and 6E133-49 (Section 3.2)
• Installing the 6E123-50 and 6E133-49 in the 6C105 chassis
(Section 3.4)
• Connecting to the network (Section 3.5)
3.1 REQUIRED TOOLS
A Phillips screwdriver is required to install the Fast Ethernet Interface
Modules in the 6E123-50.
3.2 UNPACKING THE 6E123-50 AND 6E133-49
1. Open the box and remove the packing material protecting the module.
2. Verify the contents of the carton as listed in Table 3-1.
Only qualified personnel should install the 6E123-50 and
6E133-49.
Table 3-1 Contents of 6E123-50 and 6E133-49 Carton
Item Quantity
6E123-50 or 6E133-49 1
Release Notes 1
RJ21 Angle Adapter 4