User`s guide

Switch Statistics Screen
6E123-50 and 6E133-49 User’s Guide 5-95
The Module Statistics Menu screen displays the following menu items:
SWITCH STATISTICS
The Switch Statistics screen lists the number of frames received,
transmitted, filtered, and forwarded by each interface.
INTERFACE STATISTICS
The Interface Statistics screen provides the MIB-II statistics for each
switched interface, on an interface-by-interface basis.
RMON STATISTICS
The RMON Statistics screen displays all the statistics gathered by the
embedded RMON agent built-in to the 6E123-50 and 6E133-49.
REPEATER STATISTICS
The Repeater Statistics screen provides the operating statistics for each
port (1 through 48) and its corresponding network (ENETs 1 through 4).
5.29 SWITCH STATISTICS SCREEN
The Switch Statistics screen, Figure 5-35, lists the number of frames
received, transmitted, filtered, and forwarded by each interface, including
backplane interfaces.
NOTES
The Switch Statistics screen will not be available if the
operational mode of the module has been set to SECURE
FAST VLAN. This screen may only be used by modules
configured to operate as traditional or 802.1Q switches.
Ethernet Networks 1 through 4 (ENET 1–4) are considered
single switched ports.
Ports 5 and 6 on the Switch Statistics screen represent the
optional Fast Ethernet Interface Modules available for the
6E123-50.
Port 5 on the Switch Statistics screen represents the optional
HSIM available for the 6E133-49.
Ports 7 through 10 (6E123-50) or 6 through 9 (6E133-49) on
the Switch Statistics screen represent the backplane
connections that the module has with the 6C105 chassis. The
module has a direct connection to every other slot in the
chassis.