User`s guide

Chapter 5: Local Management
5-90 6E123-50 and 6E133-49 User’s Guide
10. Use the arrow keys to highlight the SAVE command.
11. Press ENTER. The message “SAVED OK” displays and all ports of
the connector are set to the selected operating mode.
5.27 PORT LEVEL SECURITY CONFIGURATION
SCREEN
The Port Level Security Configuration screen, Figure 5-33, functions
similarly to the Repeater Level Security Configuration screen, except that
it is used to set the security of each port of a connector.
To access the Port Level Security Configuration screen, use the arrow
keys to highlight the PORT LEVEL SECURITY CONFIGURATION
menu item on the Repeater Configuration Menu screen and press ENTER.
The Port Level Security Configuration screen displays.
Figure 5-33 Port Level Security Configuration Screen
6E123-50 LOCAL MANAGEMENT
Port Level Security Configuration
Module Type: 6E123-50 Firmware Revision: XX.XX.XX
Slot Number: X BOOTPROM Revision: XX.XX.XX
Po rt State Lock/Learn Action On Intruder Secure Address
1 [Secure]
[LockOnNext] [DisablePort] [SendTrap]
2 [NonSecure] [Unlocked] [00-00-00-00-00-00]
3 [Secure] [LockedOnAddr] [DisablePort] [SendTrap] [xx.xx.xx.xx.xx.xx]
4 [NonSecure] [Unlocked] [00-00-00-00-00-00]
5 [NonSecure] [Unlocked] [00-00-00-00-00-00]
6 [NonSecure] [Unlocked] [00-00-00-00-00-00]
7 [NonSecure] [Unlocked] [00-00-00-00-00-00]
8 [NonSecure] [Unlocked] [00-00-00-00-00-00]
9 [NonSecure] [Unlocked] [00-00-00-00-00-00]
10 [NonSecure] [Unlocked] [00-00-00-00-00-00]
11 [NonSecure] [Unlocked] [00-00-00-00-00-00]
12 [NonSecure] [Unlocked] [00-00-00-00-00-00]
INTERFACE #: [1] SAVE EXIT RETURN
Event Message Line
27461_113