User`s guide

High Speed Interface Configuration Menu Screen (6E123-50 Only)
6E123-50 and 6E133-49 User’s Guide 5-71
Figure 5-27 High Speed Interface Configuration Screen for the 6E123-50
The following briefly explains each field of the High Speed Interface
Configuration screen.
Port Type (Read-Only)
Displays the name of the interface (FE-100FX, FE-100TX or FE-100F3)
installed in ports 5 and 6. Figure 5-27 shows that there is an FE-100TX
interface installed in port 5 and no interface, indicated by Unknown, in
Port 6.
Link Status (Read-Only)
Indicates whether or not there is a physical connection from this port to
another 10BASE-T or 100BASE-TX/FX device. One of the following
values is displayed:
• Link – There is a link signal present and a valid physical connection
to another 10BASE-T or 100BASE-TX/FX device.
• No Link – There is no link signal present and there is no valid physical
connection to another device.
Firmware Revision: XX.XX.XX
High Speed Interface Configuration
2269_24
BOOTPROM Revision: XX.XX.XX
Port 5
FE-100TX
Link
100Base-TXFD
[Auto-Negotiation]
[100Base-TXFD] [Disabled]
RETURN
Module Type: 6E123-50
Slot Number:
X
6E123-50 LOCAL MANAGEMENT
Event Message Line
SAVE
Port Type
Link Status
Current Oper. Mode
Desired Oper. Mode
Advertised Ability
Port 6
Unknown
No Link
[N/A]
[N/A]
[N/A]
EXIT