User`s guide

Switch Configuration Screen
6E123-50 and 6E133-49 User’s Guide 5-61
5.18 SWITCH CONFIGURATION SCREEN
The Switch Configuration screen, Figure 5-24, provides the basic setup
options to make a switch operational in your network.
Access the Switch Configuration screen from the Module Configuration
Menu screen by using the arrow keys to highlight the SWITCH
CONFIGURATION menu item and pressing ENTER. The Switch
Configuration screen, Figure 5-24, displays ports 1 through 8. To view or
edit the fields for ports 9 to 10, highlight [9-10] at the bottom of the
screen and press the ENTER key.
NOTE
The Switch Configuration screen will not be available if the
operational mode of the module has been set to SECURE
FAST VLAN. This screen may only be used by modules
configured to operate as 802.1D or 802.1Q switches.
NOTE
Ethernet Networks 1 through 4 (ENET 1–4) are considered
single switched ports.
Ports 5 and 6 on the Switch Configuration screen represent the
optional Fast Ethernet Interface Modules available for the
6E123-50.
Port 5 on the Switch Configuration screen represents the
optional HSIM available for the 6E133-49.
Ports 7 through 10 (6E123-50) or 6 through 9 (6E133-49) on
the Switch Configuration screen represent the backplane
connections that the module has with the 6C105 chassis. The
module has a direct connection to every other slot in the
chassis.